PFC-Corner

$50 - $153

SHS Size

PFC beam 1 (Long)

PFC beam 2 (Short)

No. of Bolts

Bolt Size

Shear Force at End of Beam 1(KN)

Shear Force at End of Beam 2(KN)

Tick this box if you want to weld only
(this means no 4mm dia pilot holes will be supplied for tek screws on the product)

SKU: PFC-75SHS-CH-180-4-8t-CL-130-80-8-CO-0-2-14-CNR-180PFC Category: SHS-PFC Beam Cleats

Description

Description

SHS PFC Corner cleats are perfect for attaching PFC beams to shs posts that have a 2 beam 90 degree corner connection either side of the shs post.
Most Builders will set a laser level for the top of the cleat, then slide the cleat up or down the shs post with 1 hand then use say 4-5 metal teks series 500 on each of the 2 channel faces to temporarily fix the channel cleat to the shs column, then when all cleats are fixed they will weld with a 5mm CFW down the 2 vertical edges of the shs cleat channel against the shs post. This allows for maximum strength at the cleat connection.
Welding is generally used for this connection due to the higher shear loads associated with a steel PFC Beam
These SHS-PFC Beam cleats can aslo be used if the beam is a steel C-Section Purlin.
View a slide show of SHS PFC Cleats above.